This Home Assistant custom component adding support for controlling Midea dehumidifiers on local network.

Last update: Dec 31, 2022

Overview

This custom component for Home Assistant adds support for Midea air conditioner and dehumidifier appliances via the local area network.

homeassistant-midea-air-appliances-lan

Home Assistant custom component for controlling Midea appliance on local network.

Installation instruction

HACS

The easiest way to install this integration is with HACS. First, install HACS if you don't have it yet. In Home Assistant, go to HACS -> Integrations, click on + Explore & Download Repositories, search for Midea Air Appliances (LAN), and click download. After download, restart Home Assistant.

Once the integration is installed, you can add it to the Home Assistant by going to Configuration -> Devices & Services, clicking + Add Integration and searching for Midea Air Appliances (LAN) or, using My Home Assistant service, you can click on:

Manual installation

Update Home Assistant to version 2021.12 or newer.
Clone this repository.
Copy the custom_components/midea_dehumidifier_lan folder into your Home Assistant's custom_components folder.

Configuring

Add Midea Air Appliances (LAN) integration via UI.
Enter Midea cloud username and password. Those are the same used in NetHome Plus mobile application.
The integration will discover appliance on local network(s).
If an appliance is not automatically discovered, but is registered to the cloud account, user is prompted to enter IPv4 address of the appliance.

Known issues

If IPv4 address of appliance changes, new IPv4 address will not be used until Home Assistant's restart.
If Home Assistant installation doesn't have access to physical network, the integration may not discover all appliances.
Dehumidifier modes correspond to Inventor EVA ΙΟΝ Pro Wi-Fi model. Your dehumidifier might use different names (e.g., Boost instead of Dry)
Having two integrations accessing the same device can result in undefined behavior. For example, having two Home Assistant instances accessing same device, or using one of other Midea appliance integrations in combination with this one. To avoid problems, use a single integration - this one 🙂 .
If you encounter issues after upgrading, uninstall the integration, restart Home Assistant and re-install it.
Some of sensors and switches are disabled by default. You need to enable them manually. See tables below for more information.
Temperature sensor on dehumidifier is often under-reporting real ambient temperature. This may be due to sensor proximity to cooling pipes of the humidifier, algorithm, or electronics error. The under-reporting depends on the active mode, and stronger modes may result in larger offset from real temperature.

Supported appliances

Comfee MDDF-16DEN7-WF or MDDF-20DEN7-WF (tested with 20L version)
Inventor EVA ΙΟΝ Pro Wi-Fi (EP3-WiFi 16L/20L) (tested with 20L version)
Inventor Eva II Pro Wi-Fi (EVP-WF16L/20L)
Pro Breeze 30L Smart Dehumidifier with Wifi / App Control
Midea SmartDry dehumidifiers (22, 35, 50 pint models)
Midea Cube dehumidifiers (20, 35, 50 pint models)

Supported are V3 and V2 protocols that allow local network access. V3 protocol requires one connection to Midea cloud to get token and key needed for local network access. Some old models use V1 XML based protocol which is not supported. Some newer models use Tuya protocol.

Supported entities

This custom component creates following entities for each discovered dehumidifier:

Platform	Description
`humidifier`	Dehumidifier entity. Depending on the model following modes are supported: `Set`, `Continuos`, `Smart` (if supported), `Dry` (if supported), `Antimould` (if supported), `Purifier` (if supported).
`fan`	Fan entity for controlling dehumidifier fan. Three preset modes are available: `Low`, `Medium` and `High`.
`binary_sensor`	Problem sensor indicating when tank is full.
`binary_sensor`	Problem sensor indicating when tank is removed (created if device announces that pump is supported).
`binary_sensor`	Problem sensor indicating when filter needs cleaning (created if device announces that filter is supported).
`binary_sensor`	Cold sensor indicating defrosting is active (disabled by default).
`sensor`	Sensors for current relative humidity measured by dehumidifier.
`sensor`	Sensor for current temperature measured by dehumidifier.
`sensor`	Sensor for water level in the tank (created if device announces that water level is supported).
`sensor`	Sensor with value of error code of the appliance (disabled by default).
`switch`	Switch ion mode on and off (created if device announces that (an)ion mode is supported)
`switch`	Switch pump on and off (created if device announces that pump is supported)
`switch`	Switch to activate beep on action (disabled by default)

This custom component creates following entities for each discovered air conditioner:

Platform	Description
`climate`	Climate entity.
`binary_sensor`	Problem sensor indicating when tank is full.
`binary_sensor`	Problem sensor indicating when filter needs replacement (disabled by default).
`binary_sensor`	Cold sensor indicating defrosting is active (disabled by default).
`sensor`	Sensor for outside temperature measured by air conditioner.
`sensor`	Sensor with value of error code of the appliance (disabled by default).
`switch`	Switch purifier mode on and off (enabled if device announces that it is supported)
`switch`	Switch dryer mode on and off (disabled by default)
`switch`	Switch sleep mode on and off (disabled by default)
`switch`	Switch to activate beep on action (disabled by default)
`switch`	Switch display to Fahrenheit degrees (enabled if device announces that it is supported)
`switch`	Switch turbo fan on and off (enabled if device announces that it is supported)
`switch`	Switch screen on and off (enabled if device announces that it is supported)

Notice

Midea, Inventor, Comfee', Pro Breeze, and other names are trademarks of their respective owners.

Comments

Temp changing doesn't work
Version of the custom_component

Configuration

Add your logs here.

Describe the bug

A clear and concise description of what the bug is.

Every option for the AC is working except changing the temperature. When I am changing it with HA, the new value isn't send to the AC. But when I change it with the app, Also when I am changing the temp value with the app (mssmarthome) it doesn't change on HA side.

Debug log

Add your logs here.
opened by besiktas97 28
now ac devices are detected, but don't work well

The ac devices now are detected perfectly, great work!!! but they don't work well, the dry and heat functions are inverted and the power on status is missing. I managed to get logs, the problem was tha I didn't have logger in configuration.yaml, now I have this:

logger: default: critical logs: custom_components.midea_dehumidifier_lan: DEBUG midea_beautiful: DEBUG

I'm using the last version 0.8.1

I send you the log: 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to 192.168.*****:6445 b'ZZ\x01\x11H\x00\x92\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x7fu\xbdk>O\x8bv.\x84\x9cnW\x8de\x90\x03n\x9dCB\xa5\x0f\x1fV\x9e\xb8\xec\x91\x8e\x92\xe5' 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Received from 192.168.*****:6445 b'\x83p\x00\xb8 \x0f\x04[ZZ\x01\x11\xa8\x00z\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00;\x02\x00\x00\x00"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xbd\xcb\xea\xf9\x04\xe6F\x92\xf2t\xbcR\xce\xdf\xa7\te\x8eH*W_\x9f\x14\x93\x08SN\xc9\x8a\xf6\xb0Zo_\xf9\x88\x82\xb7\x86\x19\xc6|\x82\r\x18a\xa8\'\xa6\xc8\x00v+\x80\x94\x95\xb0\x86)\xd7\xeeQ\x9e\xf7\x15\x98\xd9\xb8Jk\x9c\xbc\x02\x94o\xd7d\x1d:\x1f\xca\x94T\x13\x03\x88LR\xe8\x80\xdd\xef\xc01\x90\xf3\x14C\xd1|:\xac\x03\xa7ef\x14\xae\x1d\xcaD\x1b\xe6\xd7\xaeh\xe3\x13\xb7h\xaf\\\xf68.F\x0e\xbb\xa0\xfc\xda\xf6N\x80\xb7\xc0\xb8d\xd4\x7f\x9c~?' 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] From 192.168.***** decrypted reply=b'\x8f\x01\xa8\xc0,\x19\x00\x00000000P0000000Q1A8407D9C3BAD0000\x0bnet_ac_3BAD\x00\x00\x00\x00\x01\x00\x00\x00\x04\x00\x00\x00\x00\x00\xac\x00\x00\x00\x00\x00\x00\x00\xa8@}\x9c;\xad\x06\x9f\xcd\x03\x00\x08\x01\x03\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Creating AirConditionerAppliance 3738339534**** 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Descriptor data '{id=3738339534****, address=192.168.*****, port=6444, version=3, name=37383395344955, online=True, type=0xac, subtype=0, flags=0, extra=1, reserved=0, mac=a8407d9*****, ssid=net_ac_3BAD, udp_version=4000000, protocol=069fcd, version=3.0.8, sn=000000P0000000Q1A8407D9C********, state=[Air conditioner]{id=3738339534****, type=0xac mode=0, running=False, turbo=False, fan_speed=40, turbo_fan=False, purifier=False, dryer=False, target_temperature=0, indoor_temperature=2.2250738585072014e-308, outdoor_temperature=2.2250738585072014e-308, vertical_swing=False horizontal_swing=False comfort_sleep=False, error_code=0, prompt=False, supports={}}}' 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Appliance sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Attempting new connection to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:47 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00@ \x00\x00\x00\xdf\xd8\xdf(\xdb\xbfNqN8\xad\x10X\xb0r(\xb4\xf9\x92\xd8\xf1s2\xa0\x82k\x02\r\xce\x1d\xb9\xd9\xa2\xd7>\x9e\xf6=\xc8\xfe\xf0\xaa\x01!uQ\x8d\x14\xf6/p\xb8"\xe2\xa2\x96\xe56p\x03?\x11\xfb\x92' 2022-04-21 16:44:48 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00@ \x01\x00\x00v\xcc\x18\xac\xd3\x13\xe9Q \x95\x98a\xfe\x17\xf0\x0b\xa1.\xa5\x9d>\x11\xed\xd1\x00<\x1aG7(6W\x8e\xdb\xb7|\x80\xbbU\xe7C\xa7\x9b\x9a\rn\xaf\xc3\x91\x05\xfcW\x99\xcfB TK\xb5 \xa1T\xc9\xfc' 2022-04-21 16:44:48 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got TCP key for: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:48 DEBUG (SyncWorker_2) [midea_beautiful.lan] Getting more capabilities 2022-04-21 16:44:48 DEBUG (SyncWorker_2) [midea_beautiful.lan] Packet for: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 data=b'ZZ\x01\x11H\x00 \x00\x00\x00\x00\x000,\x10\x15\x04\x16\x14;\x02\x00\x00\x00"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00<\xe2i}\x05P\xa3\xd6d\xfb~\xe1\xb1\xd2\xffd9/\xddu\x17\xff\x0cT\xd1\x88\xddf\x88AR\x1f' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00n fP\xe8\x86\xa7\xe8[\xd0\x1e\xb3C\x14j\x18T!\xd2\xb4\x19X\x19e\xea\x8a\xbf"+$\xc5Y\xcb3$&\x94\xa41\xc2\x9dk~\xd3Dl\xf0\xa8T\xeb\x9a\xea\xc8\x1d\x14u\xd9\xf1\xf2A\xfb\x7fS\xadw$'6\x81\xe0d\x7f\xfdL\xa9\x86\xc0p\xf2\x1a\xe7\x0c\xd1"R\x1b\x90\x9d\\\x03\x15\xcc5^\xa4mUu=\x90\xd3\xf7\xce\x83\xf1\x17\xd9\'\xc2uM\x96,\x00' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e c\ty\xdc+\x0c\xce\xae<\xc3\xcff\xcf\x16e\xb7\xfc\xbe%g\x0c^+\xb0y9\xa0R\x08\x18Y\r\xc3\x93\xda\xaa\x1e\x0c\x81E\xff2N_\x8f;l\x98r,\xa0\x1b\xac*\xaa\x19\xed\x1c4|{\x02\x7f*\x169\x878\xc2\x96.h\xdf\xa4-J\x8b\xa5\xbd\xa3\x16Z\x97\xd7\xf1\xfd\x92N\x9d%\xa2Db\x18\xb0\x10_\x1d\xb9\r\xa5\xd9W\xec\xcf\xad\x08\x19\xddQ=\x8b\xd0\xfb\xd5\xd1\x17\x0f*\xcd\xae\xed\x15#a\x11\xa8\x94%t\xe2)\xb9\xc5\xcd\n7%\xa3A?C\xab\xc7' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x12\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x13\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x14\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x15\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x16\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x17\x02' 2022-04-21 16:44:49 WARNING (SyncWorker_2) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] Getting more capabilities 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] Packet for: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 data=b'ZZ\x01\x11H\x00 \x00\x00\x00\x00\x00:1,\x10\x15\x04\x16\x14;\x02\x00\x00\x00"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xeb7\xbbe\xdalO\xff\x96!\xa6\xad\x11\x1d|\x04\x828\xde\x9d\xb9\x85^\x9d\x98\x13\xa2\x10\xd2\x8e\xac\x16' 2022-04-21 16:44:49 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00n f\x1dT\xa7[A\xc2\x88\xdaW\xd8\xabbm\x00\tt\x03\xfac\xa2QQ\xb5:\xfc\x067j\xc2\x9c\xb3\n2=95\xb0v\xc60\x9e\x83\x91E\t\x8b&\xe0\x81\t\xce\xe2\x9f<\xf7\xc6 \x04c[D&\xf8\x9e\xc3e!)\x80U\x89Dm\xbb\n\xf4n3<\xcb+(R\x9dLe\x06?\!\xaf\xc6lQP\x0f\xb6s2M\xac\xcf\x99.F\xa3\rd\x96w\xeb' 2022-04-21 16:44:51 DEBUG (SyncWorker_2) [midea_beautiful.lan] Timeout receiving from sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3: timed out 2022-04-21 16:44:53 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00n fy\xe5\xf4\xf5\x1a1FXGO\x86\x10U\x14\x9c\x7f\xb1\x95J\xb8\x98H{\x15\xa1\x1c;\x9c=o\x1aG\x1f<\x955\x1f.\x1e\xf8\xc13\xac\xfff\xce$\xfc&\xdaC\x82Wp\x7f\xf8+c-\x0e\xcf\xbc\x8d}\x8dE\xbaS\x11S\xda\xce\xa4\xf2\x06A\xfd\xda\xda{\x94p\xed-\xd7\x80.\xb9n\xacF\x0f~\xfe\xef\xec\xaa0\xb9z,H\xd7\x11\xd7\r\x9aR\x98\xac\xf1' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9C******** id=3738339534*** address=192.168.***** version=3, message=b'\x83p\x00\x8e c\xf7\tF\xd6\xf8L\xd9B\xc7F\x85\xbck@\xc1\xa3-9c-\x8a,\xcfIH\x1e\x07\xec\xf9\xe2&\xe57\x9f\x12\xe55#\xb6tX\xe8\xfe\x96k\xd59\xd7\xcfpM\xbc\xe3P\xdf\x0cf\xf3\xde\xfc\xfa\x9a\xe5m\n\x8a\xfe\x95\x8bdl\x99N\xd4\xb6\xed\xb2\xf9.5\x00\xcb\\x9b\xe4\xa1t\x8c{\x82\xc9\xe2\xf9\x12\r\x1c\xe0v\x144\xd2\xa6\x89\xc9\n\x84\x02\xd4p\x81V-\x04\xc8\x01\x0e\x0e\x00\xd8\xe1\xc6^VV:\x1dd\xb0\x82\xe6\xce\xbf\xa41\xed\x1b\xac\xc7\x87\x81l\xc4J' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x12\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x13\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x14\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x15\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x16\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.appliance] Got capability b'\x17\x02' 2022-04-21 16:44:54 WARNING (SyncWorker_2) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.lan] Packet for: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 data=b'ZZ\x01\x11h\x00 \x00\x00\x00\x00\x00/6,\x10\x15\x04\x16\x14;\x02\x00\x00\x00"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00k\x00\nv\xe2~\xed,6G\xe5}\x86\x02\xdf\x8b\xd7V\xdf\x085\xcdDV\x0e\xda4\xb9\x89-\x877N\xc3\x92\x13\xbaALKqE\xc8< \xf0\x7f\x8d\xc9o\x87\x8f5\x1a\x90\xd4G\x8cd\xef,\x19\xf4' 2022-04-21 16:44:54 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e f\xd0\xabTh\xb9\x1e/d|\x80\x1e\xe5v\xf8\xf5\x8b\xb7c;\x89\xce/\xa6\xdeQ\xe8>\xe5\xba\xd7\xef\xa1#\xbe:!\x85MC5u\xb67\xa4$\xe5\x99\x1d\xd7\xe7\xf6\xae}b\x9e*\xa2\x07S\xae1by\x08c\xc0\xef\xff\xc7\xdb\r\xbcA\xdd\x12d\xe2<\x04"\x90~]8*\xce\xabDX6\xfc\xba\xa9\x87\xca\xb4u\x05\xb7\xcc\xaa\x9a\x12\xf0\xfc\xc8\xf5\x15|(\xe6\xff\x10\x81\xcf\xc1\xaa\x15\xa1\xcb'\xbe\x9cqd\x85\xc2\xbf?\x92\x9fW\x12D\xe8\xbdf+y=\x8d\xb4W' 2022-04-21 16:44:56 DEBUG (SyncWorker_2) [midea_beautiful.lan] Timeout receiving from sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3: timed out 2022-04-21 16:44:58 DEBUG (SyncWorker_2) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e f[fR\xa9\t\xa48=\x82\xd0\x88\x93\xe7F\xae\xe2\x1c\x19\xd3~\x88\x11\xbe\xdeP\xac1U\xb5\x9b\xfe\xbb\x92\xea\x85\xc1\x12l\xe0\x9a\xd9*Aac7j\'\x8a\xb0r7c\x17\xd5\xf5\x90\xf8\xf9\xc1\t\xf6_\xf5\x0b\xa0\x88\xc8y\xaa\x82L\\\x899*7\x8b?\xd0\x14\xfev#H\xda\xc9j\xa9\xc2x\xff\x97 Q\x86\x9dY\x1b\xc7\xde\x11.\xf7\xb5\xb7\xf0\x10\xb7\x1a\x87\xc0\xcbiW\x1c\x80\xf6|\xd4\xad=;U\xbdxXB\r\x02\x04,\xf3\x1a\xde\xc0",\x98q?\x8d\xa9' 2022-04-21 16:44:59 DEBUG (SyncWorker_2) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e c\xe3W\xaa\x9a\xebm\xb8\xb4@hr\xf9\xb5\xec\xa1\x12r\x14\xaa\x12\xa4\xf9^#Y\xa1\x893\x94\xf5\xc4\xd4\xdc\xba\x9f}\xfes\xe6\xea\x90(l\x84\x80\x93oe[a\xf3\x91\xa9\xc5\xaeT\x9f\x0c9?\xab\xa0\xcf$75\xb8b\xfeb\xd0\x08\x02\xc8v\xe4v_D\xac7\x97\x9dQ\xc5\xb9V"\xf5\x93\xdb\xa5\x08\x9a\xdd\xbe\x069\x8f\x06}\x0f\xb1\xc8\x85\x8b\xa08\xd0\x82*\x15jE\xb9\xb1~\xc8,\xea%\x04\xee\x1e\xb9\xc09\xb4\x07\xbe\x14\x9d!\xb8\x1b\xd7\xd2k\xc3\x91\xc7.\x17\xe0' 2022-04-21 16:44:59 DEBUG (SyncWorker_2) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:44:59 DEBUG (SyncWorker_2) [midea_beautiful.lan] refresh sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 responses=[b'\xc0\x01\x86(\x7f\x7f\x000\x80\x00\x00^O\x00\x00\x00\x00\x00\x00\x00\x00\x00V\xd66'] 2022-04-21 16:44:59 DEBUG (SyncWorker_2) [midea_beautiful.appliance] AirConditionerResponse {'run_status': True, 'i_mode': False, 'timing_mode': False, 'quick_check': False, 'appliance_error': False, 'mode': 4, 'target_temperature': 22.0, 'fan_speed': 40, 'on_timer_set': False, 'on_timer_hours': 31, 'on_timer_minutes': 45, 'off_timer_set': False, 'off_timer_hours': 31, 'off_timer_minutes': 45, 'vertical_swing': 0, 'horizontal_swing': 0, 'comfort_sleep_value': 0, 'power_saving': False, 'low_frequency_fan': False, 'turbo_fan': False, 'feel_own': True, 'comfort_sleep': False, 'natural_wind': False, 'eco': False, 'purifier': False, 'dryer': False, 'ptc': 0, 'aux_heat': False, 'turbo': False, 'fahrenheit': False, 'prevent_freezing': False, 'pmv': -3.5, 'outdoor_temperature': 14.5, 'indoor_temperature': 22.0, 'err_code': 0, 'humidity': 0} 2022-04-21 16:44:59 DEBUG (SyncWorker_2) [midea_beautiful.lan] Identified appliance: {id=3738339534****, address=192.168.*****, port=6444, version=3, name=37383395344955, online=True, type=0xac, subtype=0, flags=0, extra=1, reserved=0, mac=a8407d9*****, ssid=net_ac_3BAD, udp_version=4000000, protocol=069fcd, version=3.0.8, sn=000000P0000000Q1A8407D9C********, state=[Air conditioner]{id=3738339534****, type=0xac mode=4, running=True, turbo=False, fan_speed=40, turbo_fan=False, purifier=False, dryer=False, target_temperature=22.0, indoor_temperature=22.0, outdoor_temperature=14.5, vertical_swing=False horizontal_swing=False comfort_sleep=False, error_code=0, prompt=False, supports={'eco': 1, 'heat_8': 1, 'mode': 1, 'fan_swing': 1, 'electricity': 1, 'filter_reminder': 0}}} 2022-04-21 16:44:59 DEBUG (MainThread) [custom_components.midea_dehumidifier_lan.hub] Created coordinator for {'api_version': 3, 'id': '3738339534****', 'ip_address': '192.168.1.143', 'name': 'Buhardilla', 'token_key': '****************************************************************', 'token': '********************************************************************************************************************************', 'type': '0xac', 'unique_id': '000000P0000000Q1A8407D9C********', 'discovery': 'LAN'} 2022-04-21 16:44:59 DEBUG (SyncWorker_0) [midea_beautiful.lan] Packet for: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 data=b'ZZ\x01\x11h\x00 \x00\x00\x00\x00\x00\t;,\x10\x15\x04\x16\x14;\x02\x00\x00\x00"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00k\x00\nv\xe2~\xed,6G\xe5}\x86\x02\xdf\x8b\x9d\xf1\xee\xf7"\xcf\x96\xc5\x19\xff\x0f,\xb2U\x12\x03\xfe\xb6=\x0c\x9f\xcb\xd0y\xdf"\t\x1f\x8e\x81a<\xeb\xcd\xf0O\xcc\xa6\xe4r:66\xe7\x03nbO' 2022-04-21 16:44:59 DEBUG (SyncWorker_0) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e f\x8d5g\x9e\xc2\xf0\x8a\xe1\xaeLJ\xcf\xaa\xf7\xb1GXNc\xf0\x03\x04$\xb3\x11\x9d\x8c\xb4\x85K\xe9W\xfc\xc2\x8d\x8e\xd4\x93\x970\xe6f#.\x8e\xb8C\xb5tp\x90\x08\xf4\xce\xb7\xfek~|,b\xc0\xa3\xe5\xc3I\xdb\x83\xe9\xe5\xfc\xf8k,+\x86C\xcb\xc0W \x91\xcc#A\xc8[\xc1\xf6\x04\x04\xed\x9a\xb8Y\x16\xcb\x9c\x1c\x9e\xe8\xd2N\xf6\xac_\x1c(\x86\x01\xf6SQ\xa4\x85=\\xe8m\x82AV\xb3\xb3\xe4DT\xba\xa5!\x08-\xa0|\n\xcbV\xe90\x93\x1c' 2022-04-21 16:45:01 DEBUG (SyncWorker_0) [midea_beautiful.lan] Timeout receiving from sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3: timed out 2022-04-21 16:45:03 DEBUG (SyncWorker_0) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e f\x04C\xf8\xf0,\xdfV\rv\x9b\x06\xc4\x9f\xec\xfb\r5\xe7\xf6e\x8c\x97Y\xe9\t\rt\xb4>\xae\x0e=\xa4\xe1\x14S\xc3\xc9v\xa1\xf3\xcfHl\xe5\x1c~Q\xadz\xef\xd6\x9dt\xc9\x0b\xfbO4\xe0x\xc2\xaf%\xba\x7f\x7f\xce\xa5\x0f\x1fa\x98\x15ad\xb4\xc5\x04\xc3\x1dS\x02S\xbf\x80\x99B\xb8(<\xe6\xf6\x87\x1b\x8eD\xc2\x7f\x03\xf1\x81Qt\x1e\xaa\x83>\x93\x10\x17\x06\x9dH\xaf3\xb0\xa3\x12W\xa9\xb8\x9c~\xfb\xf7\xde\xf1BR\x85\xd1\xe7\x80\xd9\xbflM\xd4\x9d\x04\xcc' 2022-04-21 16:45:03 DEBUG (SyncWorker_0) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3, message=b'\x83p\x00\x8e c\x97\x9b\x9c0$v\x84\xd4V"\xb3\x0fd\x9e\xa5\x02\xa0\xe3\x1ajJ\xfb\xe6\xfa\xad\x18\x9e\x00c\x0cD\xfd\x15\x1a\xc1\x19/]\xe0\xed\xcc#\xa8\r16'\x98\xdb\x06\x1c9\xeb\x9c\x9c\xd0\xd9\x15\xad\xea\xa5\xd1\x15WT\r \xc4\x12\x1e\xdc\x9fO\xd0\xe66E\xc5X(\x9a\xbcYc\\x06\x11\x8c\x17@\xe7\xd0\xcb~\x04\xed\xd6\x84\xe7n@\xca\x00'}j)-9\xcdV\xb6p\xa4\x04\xd9 P\xc5\xa80\x9d\x9d{\x16\x01g~\x85\xee\xd9\xbaj\xf4|\xda\xdd\xbf\xf7\x03\xbd[\x11\xf4' 2022-04-21 16:45:03 DEBUG (SyncWorker_0) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 2022-04-21 16:45:03 DEBUG (SyncWorker_0) [midea_beautiful.lan] refresh sn=000000P0000000Q1A8407D9C******** id=3738339534**** address=192.168.***** version=3 responses=[b'\xc0\x01\x86(\x7f\x7f\x000\x80\x00\x00^O\x00\x00\x00\x00\x00\x00\x00\x00\x00\xd7\x04\x87'] 2022-04-21 16:45:03 DEBUG (SyncWorker_0) [midea_beautiful.appliance] AirConditionerResponse {'run_status': True, 'i_mode': False, 'timing_mode': False, 'quick_check': False, 'appliance_error': False, 'mode': 4, 'target_temperature': 22.0, 'fan_speed': 40, 'on_timer_set': False, 'on_timer_hours': 31, 'on_timer_minutes': 45, 'off_timer_set': False, 'off_timer_hours': 31, 'off_timer_minutes': 45, 'vertical_swing': 0, 'horizontal_swing': 0, 'comfort_sleep_value': 0, 'power_saving': False, 'low_frequency_fan': False, 'turbo_fan': False, 'feel_own': True, 'comfort_sleep': False, 'natural_wind': False, 'eco': False, 'purifier': False, 'dryer': False, 'ptc': 0, 'aux_heat': False, 'turbo': False, 'fahrenheit': False, 'prevent_freezing': False, 'pmv': -3.5, 'outdoor_temperature': 14.5, 'indoor_temperature': 22.0, 'err_code': 0, 'humidity': 0} 2022-04-21 16:45:03 DEBUG (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Finished fetching Buhardilla data in 4.775 seconds (success: True) 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Sending to 192.168.:6445 b'ZZ\x01\x11H\x00\x92\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x7fu\xbdk>O\x8bv.\x84\x9cnW\x8de\x90\x03n\x9dCB\xa5\x0f\x1fV\x9e\xb8\xec\x91\x8e\x92\xe5' 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Received from 192.168.:6445 b"\x83p\x00\xb8 \x0f\x04YZZ\x01\x11\xa8\x00z\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xa6\r\x00\x00\x00'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xa5lmB\xc6OF\x8bU/>y\xadJ\x1ch\x87\xeb\xb3\x86U\r\x89\xa3\xc2\x1a\xbc\xe6\xb5\x00\xaf\xc6?\xa8\xdc\xaa\xdc\xf6:$\xf9\x85D\xc7R\xd0\xa0\x19\xde\x97\x88\x14\xd8\xe9\xb6cn\x99\xcc\xc3\x8c\x1d\xd4\xd7\xd72\xc8\x05\xb4d\xd0D\x1e\xc4.\x9a2[8N\x1f\xca\x94T\x13\x03\x88LR\xe8\x80\xdd\xef\xc01\x90\xf3\x14C\xd1|:\xac\x03\xa7ef\x14\xae\x1d\xcaD\xbbzq\xbe\x05h8|\xf6f0\xe4A\xe3\xf9\xb6\x945p\x91d\xc4\x19\xfb\xb1fr\r\xf7\xb54\xd6" 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] From 192.168. decrypted reply=b'\x8e\x01\xa8\xc0,\x19\x00\x00000000P0000000Q1A8407D9EB8E10000\x0bnet_ac_B8E1\x00\x00\x00\x00\x01\x00\x00\x00\x04\x00\x00\x00\x00\x00\xac\x00\x00\x00\x00\x00\x00\x00\xa8@}\x9e\xb8\xe1\x06\x9f\xcd\x03\x00\x08\x01\x03\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Creating AirConditionerAppliance 4288095348*** 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Descriptor data '{id=4288095348****, address=192.168., port=6444, version=3, name=42880953486758, online=True, type=0xac, subtype=0, flags=0, extra=1, reserved=0, mac=a8407d9***, ssid=net_ac_B8E1, udp_version=4000000, protocol=069fcd, version=3.0.8, sn=000000P0000000Q1A8407D9E*****, state=[Air conditioner]{id=4288095348****, type=0xac mode=0, running=False, turbo=False, fan_speed=40, turbo_fan=False, purifier=False, dryer=False, target_temperature=0, indoor_temperature=2.2250738585072014e-308, outdoor_temperature=2.2250738585072014e-308, vertical_swing=False horizontal_swing=False comfort_sleep=False, error_code=0, prompt=False, supports={}}}' 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Appliance sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Attempting new connection to sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3 2022-04-21 16:45:03 DEBUG (SyncWorker_9) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3, message=b'\x83p\x00@ \x00\x00\x007W\rv\x7f\xb5\xca\xfc\xaa\xefxE\x03(\xf3\xc4\x16\x84\xabV@\xf5\x08\x90\xe0\xaeR\xce\xf2V\x01\xd5aoi\x04;\t\x7fP\xc5<\tF\xc9b\xd3\xd5\x8e\xba\xfb\x86\xfe\xf0\x01\x83\xb5,\xff\x83| %\xd0' 2022-04-21 16:45:04 DEBUG (SyncWorker_9) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3, message=b'\x83p\x00@ \x01\x00\x00\xfa\x03\xcas\x8a\x06<\xffZ;\xfa\n7\xd1\xae\x03\xfa\x11\xa9\xadB\xc6c\x0b\xb5\xdd2\xe4 \xfd\xf5W^\xf8\xe1\xfbH\xf0m\xb6\xf0\xaa\xe8\xb2\xf1\xfb\xc3\x88\xed\x1a\xe4x\xdf\x81\xbf\x0f\xb1\xd6\x95(\xc6t\xb5' 2022-04-21 16:45:04 DEBUG (SyncWorker_9) [midea_beautiful.lan] Got TCP key for: sn=000000P0000000Q1A8407D9E******** id=4288095348*** address=192.168.***** version=3 2022-04-21 16:45:04 DEBUG (SyncWorker_9) [midea_beautiful.lan] Getting more capabilities 2022-04-21 16:45:04 DEBUG (SyncWorker_9) [midea_beautiful.lan] Packet for: sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3 data=b"ZZ\x01\x11H\x00 \x00\x00\x00\x00\x008\x04-\x10\x15\x04\x16\x14\xa6\r\x00\x00\x00'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00<\xe2i}\x05P\xa3\xd6d\xfb~\xe1\xb1\xd2\xffd\xca\x0cqWQi\xf9\x03\x13\xec\n\xb7\xa5.\x1d." 2022-04-21 16:45:04 DEBUG (SyncWorker_9) [midea_beautiful.lan] Sending to sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3, message=b'\x83p\x00n fJ\xbb\xb3n\x91\xe7]\xadt+B\xc9#"\xbaE\xf84M\xbe\x0e\x02\xdf\x0e\x04\x8a\xf9-N\xb8\x97\xe9i\x80.\xc6\x02\x19\x19\x18\x858\xe4\xe6\x1d\x1d\x94\xf7\x15"\xbb\xc4\xbe\xce\xe4\xede\xc6\x9c6\x02\x87\x1eo\x99\n\t&#\xbb/\x08\xf6\xac9\x0c\xf1b\xaaVF\xfd\xda\xfd\xfb\xe7\x99\xa3VO\xd5H\x14\xb0p\xd9\x04X\r\xfd\x80:\x90jd\x9d\x89f\xe4\xb8[' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.lan] From sn=000000P0000000Q1A8407D9E******** id=4288095348*** address=192.168.***** version=3, message=b'\x83p\x00\x8e c\xe8\xb6.X\xde\x07(j\x03\x1b\xe9\xad\x14\xc0\xe8\xeda4\xa1\xda\x9djv\xad\xf3\x932\x9bi=\x90\x7f, \xa8\xa9\r@\x93\xea\xeb&0\x1d\x80\xec\xf0f\x19\xbf\xd9\xd7T#q=}\x8e\xe8\xe8\xc7\xf1\xdf\x1b\xf4\xf7\xd0\xed\xb0\xafF}\xeb\x19\xff\xae,h\x83\x86\xd7wR\x1eK\xd1\xc8\x9f\xc3\xcd)w\xd4\x8b\xe2\xb9\xbb\xe9\x95\xb0\x1fy\x1ax\xa3N\x86e pC\xf7\x01L\xa0\x1c \xe3\xfa\xb0\x18\x88\n+\xb8\xd9a\x88\x14\xef81X\xb6\xe7\xc1L\xf7:T\x8b\x8a\xd9\xe9' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.lan] Got 1 response(s) from: sn=000000P0000000Q1A8407D9E******** id=4288095348**** address=192.168.***** version=3 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x12\x02' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x13\x02' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x14\x02' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x15\x02' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x16\x02' 2022-04-21 16:45:05 DEBUG (SyncWorker_9) [midea_beautiful.appliance] Got capability b'\x17\x02' 2022-04-21 16:45:05 WARNING (SyncWorker_9) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02'`

As you can see I get this error continuously: 2022-04-21 16:44:49 WARNING (SyncWorker_2) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02'

opened by marcoahp 21
"Beep" Sound and a nice card

Τhe dehumidifier itself makes a sound every time you press on buttons as a confirmation so I think it would make sense to also have it make the sound when you control if via HA. So you know when you change an option from HA that it actually happened

Also it would be nice if we can control the humidifier from a card that has all the control in it, toogle on/off, modes, fan speeds... all in one place.
enhancement

opened by PskNorz 18
Issues adding new air conditioner

I keep getting the message below when I try and add the air conditioner.

Unable to connect to appliance (Unable to send data after 5 retries, last error timed out for 000000P0000000Q130B23747******** (1539316299****)).

How do I fix? I am on the latest updates and it works fine on the midea app.

opened by Drreeves23 17
0.6 beta errors after adding integration
Version of the custom_component:

0.6 beta

Configuration

Describe the bug

Updated to 0.6 beta, restarted HA. Then removed the integration and added it again. After another restart I get the two errors. If I open the Konfigration of this integration it looks like this:

Debug log

Logger: homeassistant.config_entries Source: custom_components/midea_dehumidifier_lan/hub.py:345 Integration: Midea Air Appliances (LAN) (documentation, issues) First occurred: 22:29:44 (1 occurrences) Last logged: 22:29:44

Error setting up entry Midea Air Appliance for midea_dehumidifier_lan Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 313, in async_setup result = await component.async_setup_entry(hass, self) # type: ignore File "/config/custom_components/midea_dehumidifier_lan/init.py", line 63, in async_setup_entry await hub.async_setup() File "/config/custom_components/midea_dehumidifier_lan/hub.py", line 449, in async_setup await self._setup_discovery() File "/config/custom_components/midea_dehumidifier_lan/hub.py", line 400, in _setup_discovery self.discovery_helper.setup(self.data) File "/config/custom_components/midea_dehumidifier_lan/hub.py", line 345, in setup if device[CONF_DISCOVERY] != DISCOVERY_LAN: KeyError: 'discovery'

Logger: custom_components.midea_dehumidifier_lan.hub Source: custom_components/midea_dehumidifier_lan/api.py:52 Integration: Midea Air Appliances (LAN) (documentation, issues) First occurred: 22:29:44 (1 occurrences) Last logged: 22:29:44

Error while setting appliance id=18691697883547 sn=000000P0000000Q1A0681CAD4B810000 ip=192.168.0.106: Missing cloud credentials Traceback (most recent call last): File "/config/custom_components/midea_dehumidifier_lan/hub.py", line 514, in _process_appliance appliance = await self.hass.async_add_executor_job( File "/usr/local/lib/python3.9/concurrent/futures/thread.py", line 52, in run result = self.fn(*self.args, **self.kwargs) File "/config/custom_components/midea_dehumidifier_lan/api.py", line 52, in appliance_state return midea_beautiful_api.appliance_state( File "/usr/local/lib/python3.9/site-packages/midea_beautiful/init.py", line 130, in appliance_state return get_appliance_state( File "/usr/local/lib/python3.9/site-packages/midea_beautiful/lan.py", line 943, in get_appliance_state raise MideaError("Missing cloud credentials") midea_beautiful.exceptions.MideaError: Missing cloud credentials

bug
opened by u20p17 17
Entity for Bucketless Mode

If possible, please add an entity showing if in bucketless mode or not.

I would say that it should be a read only binary sensor entity but I guess it carries the same risk as the pump entity. Neither are ones you'd want to really turn on without being at the unit and making sure it's physically setup correctly :)
enhancement

opened by kramttocs 14
AC, all devices go "unavailable" when power off
Version of the custom_component

version = "0.8.2"

Configuration

used 192.168.1.0/24 to discover IP.

Used the HACS install.

Describe the bug

I was able to add the integration, but when the AC is powered off, all the devices go unavailable. I have to completely remove, and then add back to get them functioning again.

Debug log

log starts where I pressed the "power off" in the card.

https://www.toptal.com/developers/hastebin/uwulagemuc.yaml
opened by neuman1812 11
Air conditioner detected, no temperatue new settings accepted, on off switch is missing

2x air conditioner recognized with 103 dongle, "shareed or split" air conditioners are not recognized, no new settings (temperature changeis not transmitted to air conditioning) are accepted, mode change is accepted, on/off switch is missing

So far great work!

at log: 2022-05-22 12:17:09 WARNING (SyncWorker_2) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02' 2022-05-22 12:17:10 WARNING (SyncWorker_2) [midea_beautiful.appliance] Midea B5 unknown property=b'\x1a\x02'

opened by HAUSER3 10
Integration issues not using cloud polling in v0.5.0
Just providing some feedback on the latest v0.5.0 update.

After installing the v0.5.0 update, HA had some problems maintaining a connection to the Midea 22 Pint Smart Dehumidifier (MAD22S1WWT) using 'Midea Air' app, which was previously working under v0.4.x. It initially failed, and then came back for a short while for some unknown reason, then failed again, and never returned (after multiple restarts, etc).

So I removed the integration, and started from scratch. The short version is that if 'Use cloud API to poll devices' was disabled, I was unable to pair device; if 'Use cloud API to poll devices' was enabled, it paired perfectly first time. The following is just more detail.

Details:

I tried multiple times adding without using 'Use cloud API to poll devices', with no luck. I tried both 'basic' and 'advanced' , with every combination of options that I could think of, including with and without defining the IPV4 address, and with and without defining a name (in case it was looking for a name that did not exist). Each time I got the same error.

Appliance IPv4 address is missing We were unable to discover an appliance called Dehumidifier with the id 30786325860938 on the local network. If you know appliance's IPv4 address, please enter it below to add it to Home Assistant. You can also provide token and key if you have them. If not, we will obtain them from Midea cloud. Invalid username or password (Unable to get valid token for id=30786325860938 ip=192.168.0.116:6444 version=3)

I did supply the reserved static IPV4 address, with no luck. I do not have a token or key (not sure where I would get this info). Also the IP in the error is not the defined IP on the network, and as far as I know, nothing is defined on that IPV4 address. Not sure where it is getting that address from, or the id.

Edit: One more detail. I noticed that it would kick me off the Midea Air app during this process, requiring me to log back in. Don't know if this is significant.

After trying many times I gave up and selected 'Use cloud API to poll devices'; it worked perfectly the first time. No issues!

Just thought I would let you know. If you need any additional error codes, etc. Please let me know and I can replicate the experiment.

Thanks again for all your hard work! Very much appreciated.
opened by oadslug 10
Cant install integraton - finds name but not device
Version of the custom_component
0.3.0
Configuration

Add your logs here.

Add your logs here.

Describe the bug

I can install the custom component via HACS. I can choose the integration. But I cannot install it.

Debug log

Add your logs here.

I have succesfully used "midea_dehumidfier" custom component for about 2 years but wanted to switch to yours because of the "tank full" sensor. But I have no luck with yours. This one I use: https://github.com/barban-dev/homeassistant-midea-dehumidifier
duplicate enhancement
opened by sanderlv 10
MSmartHome Account Error

There seems to be an issue with MSmartHome accounts. I migrated one of my devices as a test and created a new MSmartHome account, but logging in with the information leads to an error "Account does not exist".
bug

opened by danbosketch 8
Account not detected

I have recently purchased an Inventor EVA ION Pro WiFi. I have set it up in the Inventor Control App and got it working bit when I try to connect it to HA I get this error

Unable to connect to Midea cloud API (Cloud authentication error: this account does not exist (3102)).

What am I doing wrong? I am using the credentials I used to sign into the App.

I tried to follow this but again fails at the log in stage

https://youtu.be/AMANgnRq4Vg

opened by sohail579 1
Warning - Error fetching Dehumidifier data in logs when dehumidifier is off

Running v0.8.12 of the integration with a Inventor EVA ΙΟΝ Pro Wi-Fi 20L Dehumidifier

While the dehumidifier is running there appear to be no issuses but once it has been turned off (via wifi or the button on the top of the Dehumidifier, not at the wall :) ) I start to get the occasional warning in the logs:

2022-12-22 21:17:50.130 WARNING (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Error fetching Dehumidifier data: Unable to send data after 5 retries, last error timed out for ******** (), will be trying again. 2022-12-22 21:18:55.406 WARNING (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Error fetching Dehumidifier data: Unable to send data after 5 retries, last error [Errno 104] Connection reset by peer for ******** (), will be trying again. 2022-12-23 07:35:11.141 WARNING (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Error fetching Dehumidifier data: Unable to send data after 5 retries, last error timed out for ******** (), will be trying again. 2022-12-23 07:36:16.406 WARNING (MainThread) [custom_components.midea_dehumidifier_lan.appliance_coordinator] Error fetching Dehumidifier data: Unable to send data after 5 retries, last error [Errno 104] Connection reset by peer for ******** (), will be trying again.

The Logbook doesn't show any periods of unavailable and control via HA works as I would expect.

opened by LucidityCrash 0
Setup failed after Update of Home Assistant

Hello, i don't know which update let the integration failed. The log is

Logger: homeassistant.setup Source: setup.py:210 First occurred: 13:04:27 (1 occurrences) Last logged: 13:04:27

Setup failed for custom integration midea_dehumidifier_lan: Unable to import component: cannot import name 'MideaCloud' from 'midea_beautiful.cloud' (/usr/local/lib/python3.10/site-packages/midea_beautiful/cloud.py)

opened by twelve-cgn 0
Screen toggle switch does not work for AC
Version of the custom_component

v0.8.12

Configuration

Configured via UI

Describe the bug

The switch for controlling the screen (I'm assuming that is what this does) does not appear to work. After I went in and enabled it, it does not fully initialize and actually become usable.

The "LED" button on my remote does correctly toggle the LED display on the front of the AC.
opened by poldim 0
State of Danby/Midea dehumifiers when on reflects target humidity instead of 'on'

Version of the custom_component

.8.12

Describe the bug

I am using a Danby DDR050BCWDB-ME-6 which is as far as I can tell a clone of the Midea Cube 50 pint model.

I have registered the dehumidifier with the Midea app rather than the Danby App.

The humidifier is recognized by the integration and works as expected. However I've noticed that the state for the humidifier. entity appears to report the state as the current target humidity instead of "on" when on and when used in automations. Or that the "humidity" attribute is being treated as the "on" state.

For instance if you go to create an automation that checks the state of the humidifier. entity from "off" to "on" there is no option for "on", only "off" and the target humidity.

Yet if you look at the state while on in the Developer Tools or using a template the state is reported correctly as 'on'.

This causes a problem when trying to create an automation with a state change or condition from "off" to "on". You can only set a "from" state of "off" but cannot set a "to" state of "on".

opened by jayscovill 1
Climate component says cooling, when actually heating
Version of the custom_component

8.12

Configuration

Configured via UI

Describe the bug

The climate component reports that the device is cooling when it's actively set to heating and is in fact producing heat.

Debug log
opened by poldim 0

Releases(v0.8.12)

v0.8.12(Aug 24, 2022)
Add refresh after update for air conditioners

Support for MSmartHome app

Better detection of air conditioners

Fix horizontal/vertical swing for air conditioners

Fix air conditioner off mode

Bump library dependency version

Remove obsolete method

Fix capabilities regression from v0.8.10

Breaking change

Configuration will be automatically migrated, but the process may fail in some cases. If that happens, it is advised to uninstall and re-install component.

Component no longer uses application key and id. Application name is used instead to identify cloud connectivity process.

Source code(tar.gz)
Source code(zip)
v0.8.11(Jul 13, 2022)
Support for MSmartHome app

Better detection of air conditioners

Fix horizontal/vertical swing for air conditioners

Fix air conditioner off mode

Bump library dependency version

Remove obsolete method

Fix capabilities regression from v0.8.10

Breaking change

Configuration will be automatically migrated, but the process may fail in some cases. If that happens, it is advised to uninstall and re-install component.

Component no longer uses application key and id. Application name is used instead to identify cloud connectivity process.

Source code(tar.gz)
Source code(zip)
v0.8.2(May 23, 2022)
Support for MSmartHome app

Better detection of air conditioners

Fix horizontal/vertical swing for air conditioners

Fix air conditioner off mode

Bump library dependency version

Breaking change

Configuration will be automatically migrated, but the process may fail in some cases. If that happens, it is advised to uninstall and re-install component.

Component no longer uses application key and id. Application name is used instead to identify cloud connectivity process.

Source code(tar.gz)
Source code(zip)
v0.6.4(Feb 23, 2022)
Fix switch on for fan for cube appliances

Breaking Changes

Unique id of entities changed. Using serial number now instead of cloud API id.

Removed sleep switch.

Removed speed control for fan (preset control is still there).

Major changes

Added support for air conditioners (beta)

Added periodic discovery of appliances.

Added support for appliance address change.

Enable integration configuration.

Enable discovery of appliances at later time (after integration set up)

Select appliance discovery behavior via dropdown

Add notification if appliance is discovered on the network, but was ignored or polled from the cloud

Added tank removed (bucket) binary sensor

Added fan enabled switch.

Support presets for fan.

Added capabilities attribute to humidifier and climate entities.

Added last_error_code and last_error_time attribute to humidifier and climate entities.

Removed error code sensor and added attribute to main entites.

Improved logging when coordinator fails to load device data.

Mask confidential information from logs.

Extended and made configurable time before device is considered unavailable.

Bug fixes

If appliance doesn't load at start, integration will attempt again to set it up.

An error during startup doesn't prevent integration to load.

Fixed integration reload.

Fixed entity naming conflicts after an appliance with same id as another old appliance is added.

Full Changelog: https://github.com/nbogojevic/homeassistant-midea-air-appliances-lan/compare/v0.5.0...v0.6.0
Source code(tar.gz)
Source code(zip)
v0.5.0(Dec 30, 2021)
Support for v2 appliance protocol

Support for beep prompt

Detecting available modes and services (like fan modes, dehumidifier modes, ion, pump)

Bug fixes

Source code(tar.gz)
Source code(zip)
v0.4.3(Dec 28, 2021)
Bump version of midea-beautiful-dehumidifer library to 0.5.2

Source code(tar.gz)
Source code(zip)
v0.3.0(Dec 22, 2021)
Support for advanced options

custom app key/app id

specify network range for discovery

Added temperature sensor

More details in error messages

Improved UI messages

Source code(tar.gz)
Source code(zip)
v0.1.0(Dec 21, 2021)

Initial custom component release (HACS ready)
Source code(tar.gz)
Source code(zip)