A SMTP server for use as a pytest fixture that implements encryption and authentication.

Overview

SMTPDFix: Test email, locally

build

A simple SMTP server based on aiosmtpd for use as a fixture with pytest that supports encryption and authentication. All this does is receives messages and appends them to a list as an email.Message.

Not intended for use with production systems.

This fixture is intended to address cases where to test an application that sends an email, it needs to be intercepted for subsequent processing. For example, sending an email with a code for password reset or two-factor authentication. This fixture allows a test to trigger the email being sent, ensure that it's sent, and read the email.

Installing

To install using pip, first upgrade pip to the latest version to avoid any issues installing cryptography:

$ python -m pip install --upgrade pip
$ pip install smtpdfix

Or, if you're using setuptools, it can be included in the extras_require argument of a setup.py file:

setup(
    ...
    extras_require={
        "test": [
            "pytest",
            "smtpdfix",
        ],
    },
)

and then installed with pip (-e assumes that you want your project to be editable):

$ python -m pip install --upgrade pip
$ pip install -e .[test]

Using

The SMTPDFix plugin, smtpd, automatically registers for use with pytest when you install smtpdfix. To use it simply add to you test method.

from smtplib import SMTP


def test_sendmail(smtpd):
    from_addr = "[email protected]"
    to_addrs = "[email protected]"
    msg = (f"From: {from_addr}\r\n"
           f"To: {to_addrs}\r\n"
           f"Subject: Foo\r\n\r\n"
           f"Foo bar")

    with SMTP(smtpd.hostname, smtpd.port) as client:
        client.sendmail(from_addr, to_addrs, msg)

    assert len(smtpd.messages) == 1

To use STARTTLS:

from smtplib import SMTP


def test_sendmail(smtpd):
    smptd.config.use_starttls = True
    from_ = "[email protected]"
    to_ = "[email protected]"
    msg = (f"From: {from_}\r\n"
           f"To: {to_}\r\n"
           f"Subject: Foo\r\n\r\n"
           f"Foo bar")

    with SMTP(smtpd.hostname, smtpd.port) as client:
        client.starttls()  # Note that you need to call starttls first.
        client.sendmail(from_addr, to_addrs, msg)

    assert len(smtpd.messages) == 1

As of version 0.2.7 the plugin automatically registers and it is not necessary to include it manually by adding pytest_plugins = "smtpdfix" to the module or conftest.py.

The certificates included with the fixture will work for addresses localhost, localhost.localdomain, 127.0.0.1, 0.0.0.1, ::1. If using other addresses the key (key.pem) and certificate (cert.pem) must be in a location specified under SMTP_SSL_CERTS_PATH.

Not as a fixture

In some situations it may be desirable to not use the fixture which is initialized before entering the test. This can be accomplished by using the SMTPDFix class.

from smtplib import SMTP

from smtpdfix import SMTPDFix


def test_smtpdfix(msg):
    hostname, port = "127.0.0.1", 8025

    with SMTPDFix(hostname, port) as smtpd:
        with SMTP(hostname, port) as client:
            from_addr = "[email protected]"
            to_addrs = "[email protected]"
            msg = (f"From: {from_addr}\r\n"
                   f"To: {to_addrs}\r\n"
                   f"Subject: Foo\r\n\r\n"
                   f"Foo bar")

            client.sendmail(from_addr, to_addrs, msg)

        assert len(smtpd.messages) == 1

Configuration

Configuration is handled through properties in the config of the fixture and are initially set from environment variables:

Property Variable Default Description
host SMTPD_HOST 127.0.0.1 or ::1 The hostname that the fixture will listen on.
port SMTPD_PORT 8025 The port that the fixture will listen on.
ready_timeout SMTPD_READY_TIMEOUT 5.0 The seconds the server will wait to start before raising a TimeoutError.
login_username SMTPD_LOGIN_NAME user
login_password SMTPD_LOGIN_PASSWORD password
use_ssl SMTPD_USE_SSL False Whether the fixture should use fixed TLS/SSL for transactions. If using smtplib requires that SMTP_SSL be used instead of SMTP.
use_starttls SMTPD_USE_STARTTLS False Whether the fixture should use StartTLS to encrypt the connections. If using smtplib requires that SMTP.starttls() is called before other commands are issued. Overrides use_tls as the preferred method for securing communications with the client.
enforce_auth SMTPD_ENFORCE_AUTH False If set to true then the fixture refuses MAIL, RCPT, DATA commands until authentication is completed.
ssl_cert_path SMTPD_SSL_CERTS_PATH ./certs/ The path to the key and certificate in PEM format for encryption with SSL/TLS or StartTLS.
ssl_cert_files SMTPD_SSL_CERT_FILE and SMTPD_SSL_KEY_FILE ("cert.pem", None) A tuple of the path for the certificate file and key file in PEM format. See Resolving certificate and key paths for more details.

If environment variables are included in a .env file they'll be loaded automatically.

Resolving certificate and key paths

In order to resolve the certificate and key paths for the SSL/TLS context SMTPDFix does the following:

  1. On initialization of a smtpdfix.Config the ssl_cert_path is set by the SMTPD_SSL_CERTS_PATH environment variable and the ssl_cert_files is set to a tuple of (SMTPD_SSL_CERT_FILE and SMTPD_SSL_KEY_FILE). If the environment variables are not set the deafults are used.
  2. If an SSL Context is needed, when the smptdfix.AuthController is initialized it will attempt to find the files in the following sequence for both the certificate file and the key file:
    1. If the value in ssl_cert_files is None then None is returned. Setting the key file to be none assumes that it has been included in the certificate file.
    2. If the value in ssl_cert_files is a valid path to a file then this is returned.
    3. ssl_cert_path and the value from ssl_cert_files are joined and returned if it a valid path to a file.
    4. A FileNotFoundError is raised.

An example, assuming that the certificate and key are written in a single PEM file located at ./certificates/localhost.cert.pem would be:

from smtplib import STMP_SSL


def test_custom_certificate(smtpd):
    smtpd.config.ssl_cert_files = "./certificates/localhost.cert.pem"
    smtpd.config.use_ssl = True

    from_ = "[email protected]"
    to_ = "[email protected]"
    msg = (f"From: {from_}\r\n"
           f"To: {to_}\r\n"
           f"Subject: Foo\r\n\r\n"
           f"Foo bar")

    with SMTP_SSL(smtpd.hostname, smtpd.port) as client:
        client.sendmail(from_addr, to_addrs, msg)

    assert len(smtpd.messages) == 1

Alternatives

Many libraries for sending email have built-in methods for testing and using these methods should generally be prefered over SMTPDFix. Some known solutions:

Developing

To develop and test smtpdfix you will need to install pytest-asyncio to run asynchronous tests, isort to sort imports and flake8 to lint. To install in a virtual environment for development:

$ python -m venv venv
$ ./venv/scripts/activate
$ pip install -e .[dev]

Code is tested using tox:

$ tox

Quick tests can be handled by running pytest directly:

$ pytest -p no:smtpd --cov

Before submitting a pull request with your changes you should ensure that all imports are sorted and that the code passes linting with flake8.

$ isort .
$ flake8 .

If you have upgraded or added any requirements you should add them to setup.py along with the minimal constraints needed for the functionality. The requirements.txt file can then be updated by running:

$ bash ./scripts/fix-requirements.sh .

Known Issues

  • Firewalls may interfere with the operation of the smtp server.
  • Authenticating with LOGIN and PLAIN mechanisms fails over TLS/SSL, but works with STARTTLS. Issue #10
  • Currently no support for termination through signals. Issue #4
  • If the fixture start exceeds the ready_timeout and aborts the host and port are not consistently released and subsequent uses may result in an error. Issue #80

©2020-2021, Written with and in Montreal, QC

Comments
  • Bump isort from 5.6.4 to 5.7.0

    Bump isort from 5.6.4 to 5.7.0

    Bumps isort from 5.6.4 to 5.7.0.

    Release notes

    Sourced from isort's releases.

    5.7.0 December 30th 2020

    • Fixed #1612: In rare circumstances an extra comma is added after import and before comment.
    • Fixed #1593: isort encounters bug in Python 3.6.0.
    • Implemented #1596: Provide ways for extension formatting and file paths to be specified when using streaming input from CLI.
    • Implemented #1583: Ability to output and diff within a single API call to isort.file.
    • Implemented #1562, #1592 & #1593: Better more useful fatal error messages.
    • Implemented #1575: Support for automatically fixing mixed indentation of import sections.
    • Implemented #1582: Added a CLI option for skipping symlinks.
    • Implemented #1603: Support for disabling float_to_top from the command line.
    • Implemented #1604: Allow toggling section comments on and off for indented import sections.
    Changelog

    Sourced from isort's changelog.

    5.7.0 December 30th 2020

    • Fixed #1612: In rare circumstances an extra comma is added after import and before comment.
    • Fixed #1593: isort encounters bug in Python 3.6.0.
    • Implemented #1596: Provide ways for extension formatting and file paths to be specified when using streaming input from CLI.
    • Implemented #1583: Ability to output and diff within a single API call to isort.file.
    • Implemented #1562, #1592 & #1593: Better more useful fatal error messages.
    • Implemented #1575: Support for automatically fixing mixed indentation of import sections.
    • Implemented #1582: Added a CLI option for skipping symlinks.
    • Implemented #1603: Support for disabling float_to_top from the command line.
    • Implemented #1604: Allow toggling section comments on and off for indented import sections.
    Commits

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies 
    opened by dependabot[bot] 5
  • Bump github/codeql-action from 2.1.35 to 2.1.37

    Bump github/codeql-action from 2.1.35 to 2.1.37

    Bumps github/codeql-action from 2.1.35 to 2.1.37.

    Changelog

    Sourced from github/codeql-action's changelog.

    CodeQL Action Changelog

    [UNRELEASED]

    No user facing changes.

    2.1.37 - 14 Dec 2022

    • Update default CodeQL bundle version to 2.11.6. #1433

    2.1.36 - 08 Dec 2022

    • Update default CodeQL bundle version to 2.11.5. #1412
    • Add a step that tries to upload a SARIF file for the workflow run when that workflow run fails. This will help better surface failed code scanning workflow runs. #1393
    • Python automatic dependency installation will no longer consider dependecy code installed in venv as user-written, for projects using Poetry that specify virtualenvs.in-project = true in their poetry.toml. #1419.

    2.1.35 - 01 Dec 2022

    No user facing changes.

    2.1.34 - 25 Nov 2022

    • Update default CodeQL bundle version to 2.11.4. #1391
    • Fixed a bug where some the init action and the analyze action would have different sets of experimental feature flags enabled. #1384

    2.1.33 - 16 Nov 2022

    • Go is now analyzed in the same way as other compiled languages such as C/C++, C#, and Java. This completes the rollout of the feature described in CodeQL Action version 2.1.27. #1322
    • Bump the minimum CodeQL bundle version to 2.6.3. #1358

    2.1.32 - 14 Nov 2022

    • Update default CodeQL bundle version to 2.11.3. #1348
    • Update the ML-powered additional query pack for JavaScript to version 0.4.0. #1351

    2.1.31 - 04 Nov 2022

    • The rb/weak-cryptographic-algorithm Ruby query has been updated to no longer report uses of hash functions such as MD5 and SHA1 even if they are known to be weak. These hash algorithms are used very often in non-sensitive contexts, making the query too imprecise in practice. For more information, see the corresponding change in the github/codeql repository. #1344

    2.1.30 - 02 Nov 2022

    • Improve the error message when using CodeQL bundle version 2.7.2 and earlier in a workflow that runs on a runner image such as ubuntu-22.04 that uses glibc version 2.34 and later. #1334

    2.1.29 - 26 Oct 2022

    • Update default CodeQL bundle version to 2.11.2. #1320

    2.1.28 - 18 Oct 2022

    • Update default CodeQL bundle version to 2.11.1. #1294

    ... (truncated)

    Commits
    • 959cbb7 Merge pull request #1436 from github/update-v2.1.37-d58039a1
    • 10ca836 Update changelog for v2.1.37
    • d58039a Merge pull request #1435 from github/orhantoy/add-CODE_SCANNING_REF-tests
    • 37a4496 Merge pull request #1433 from github/henrymercer/use-codeql-2.11.6
    • b7028af Make sure env is reset between tests
    • f629dad Merge branch 'main' into henrymercer/use-codeql-2.11.6
    • ccee4c6 Add tests for CODE_SCANNING_REF
    • 899bf9c Merge pull request #1432 from github/henrymercer/init-post-telemetry
    • dd7c3ef Remove debugging log statements
    • b7b875e Reuse existing fields in post-init status report
    • Additional commits viewable in compare view

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

    Dependabot will merge this PR once CI passes on it, as requested by @bebleo.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 4
  • Bump actions/setup-python from 2.3.1 to 2.3.2

    Bump actions/setup-python from 2.3.1 to 2.3.2

    Bumps actions/setup-python from 2.3.1 to 2.3.2.

    Release notes

    Sourced from actions/setup-python's releases.

    Update primary and restore keys for pip

    In scope of this release we include a version of python in restore and primary cache keys for pip. Besides, we add temporary fix for Windows caching issue, that the pip cache dir command returns non zero exit code or writes to stderr. Moreover we updated node-fetch dependency.

    Commits

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 4
  • Bump actions/checkout from 1f9a0c22da41e6ebfa534300ef656657ea2c6707 to bf085276cecdb0cc76fbbe0687a5a0e786646936

    Bump actions/checkout from 1f9a0c22da41e6ebfa534300ef656657ea2c6707 to bf085276cecdb0cc76fbbe0687a5a0e786646936

    Bumps actions/checkout from 1f9a0c22da41e6ebfa534300ef656657ea2c6707 to bf085276cecdb0cc76fbbe0687a5a0e786646936.

    Changelog

    Sourced from actions/checkout's changelog.

    Changelog

    v3.1.0

    v3.0.2

    v3.0.1

    v3.0.0

    v2.3.1

    v2.3.0

    v2.2.0

    v2.1.1

    • Changes to support GHES (here and here)

    v2.1.0

    v2.0.0

    ... (truncated)

    Commits

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 3
  • socket.gaierror: [Errno 8] nodename nor servname provided, or not known

    socket.gaierror: [Errno 8] nodename nor servname provided, or not known

    Dear James,

    first things first: Thanks a stack for conceiving and maintaining this excellent package. It is tremendously helpful for conducting full system tests.

    We are currently in the process of giving some love to an abandoned Python project over at [1,2], where we would like to use smtpdfix to verify email delivery within the test harness.

    When starting with smtpdfix, we quickly ran into #89. However, we were happy to find #95, which already removed that feature. Other than the potential hiccup for some users where socket.gethostbyname() croaks, we believe it will be a great enhancement because the service will be available for consumption instantly, without going through key material and certificate generation, right?

    So, we already recognized you were preparing version 0.4.0, at #144. May we humbly ask if you could publish version 0.4.0 to PyPI to make it available for pulling it into downstream projects? We think it would be a great benefit for the community. Please let us know if there are some blockers where we may be able to help out.

    With kind regards, Andreas.

    [1] https://github.com/isarengineering/SecPi [2] https://github.com/SecPi/SecPi/issues/120


    Describe the bug When the library is initializing, it croaks like:

            # Generate public certificate
            hostname = socket.gethostname()
    >       ip = socket.gethostbyname(hostname)
    E       socket.gaierror: [Errno 8] nodename nor servname provided, or not known
    
    .venv/lib/python3.10/site-packages/smtpdfix/certs.py:35: gaierror
    

    To Reproduce It happens on slightly misconfigured systems where the designated hostname does not resolve to an IP address.

    >>> import socket
    >>> socket.gethostbyname(socket.gethostname())
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    socket.gaierror: [Errno 8] nodename nor servname provided, or not known
    

    Expected behavior The library should work instantly by starting an SMTP server on port 8025.

    Environment (please complete the following information):

    • macOS 10.15.7
    • Python 3.10
    • smtpdfix 0.3.3
    bug 
    opened by amotl 3
  • Bump actions/checkout from b0e28b5ac45a892f91e7d036f8200cf5ed489415 to 3.0.2

    Bump actions/checkout from b0e28b5ac45a892f91e7d036f8200cf5ed489415 to 3.0.2

    Bumps actions/checkout from b0e28b5ac45a892f91e7d036f8200cf5ed489415 to 3.0.2. This release includes the previously tagged commit.

    Release notes

    Sourced from actions/checkout's releases.

    v3.0.2

    What's Changed

    Full Changelog: https://github.com/actions/checkout/compare/v3...v3.0.2

    Changelog

    Sourced from actions/checkout's changelog.

    Changelog

    v3.0.2

    v3.0.1

    v3.0.0

    v2.3.1

    v2.3.0

    v2.2.0

    v2.1.1

    • Changes to support GHES (here and here)

    v2.1.0

    v2.0.0

    v2 (beta)

    • Improved fetch performance

    ... (truncated)

    Commits

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 3
  • Bump actions/setup-python from 3.1.2 to 4

    Bump actions/setup-python from 3.1.2 to 4

    Bumps actions/setup-python from 3.1.2 to 4.

    Release notes

    Sourced from actions/setup-python's releases.

    v4.0.0

    What's Changed

    • Support for python-version-file input: #336

    Example of usage:

    - uses: actions/setup-python@v4
      with:
        python-version-file: '.python-version' # Read python version from a file
    - run: python my_script.py
    

    There is no default python version for this setup-python major version, the action requires to specify either python-version input or python-version-file input. If the python-version input is not specified the action will try to read required version from file from python-version-file input.

    • Use pypyX.Y for PyPy python-version input: #349

    Example of usage:

    - uses: actions/setup-python@v4
      with:
        python-version: 'pypy3.9' # pypy-X.Y kept for backward compatibility
    - run: python my_script.py
    
    • RUNNER_TOOL_CACHE environment variable is equal AGENT_TOOLSDIRECTORY: #338

    • Bugfix: create missing pypyX.Y symlinks: #347

    • PKG_CONFIG_PATH environment variable: #400

    • Added python-path output: #405 python-path output contains Python executable path.

    • Updated zeit/ncc to vercel/ncc package: #393

    • Bugfix: fixed output for prerelease version of poetry: #409

    • Made pythonLocation environment variable consistent for Python and PyPy: #418

    • Bugfix for 3.x-dev syntax: #417

    • Other improvements: #318 #396 #384 #387 #388

    Commits
    • d09bd5e fix: 3.x-dev can install a 3.y version (#417)
    • f72db17 Made env.var pythonLocation consistent for Python and PyPy (#418)
    • 53e1529 add support for python-version-file (#336)
    • 3f82819 Fix output for prerelease version of poetry (#409)
    • 397252c Update zeit/ncc to vercel/ncc (#393)
    • de977ad Merge pull request #412 from vsafonkin/v-vsafonkin/fix-poetry-cache-test
    • 22c6af9 Change PyPy version to rebuild cache
    • 081a3cf Merge pull request #405 from mayeut/interpreter-path
    • ff70656 feature: add a python-path output
    • fff15a2 Use pypyX.Y for PyPy python-version input (#349)
    • Additional commits viewable in compare view

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 3
  • Bump ossf/scorecard-action from 2.0.6 to 2.1.2

    Bump ossf/scorecard-action from 2.0.6 to 2.1.2

    Bumps ossf/scorecard-action from 2.0.6 to 2.1.2.

    Release notes

    Sourced from ossf/scorecard-action's releases.

    v2.1.2

    What's Changed

    Fixes

    Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.1.1...v2.1.2

    v2.1.1

    Scorecard version

    This release use Scorecard's v4.10.1

    Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.1.0...v2.1.1

    v2.1.0

    What's Changed

    Scorecard version

    This release uses scorecard v4.10.0.

    Improvements

    Documentation

    New Contributors

    Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.0.6...v2.1.0

    Commits
    • e38b190 Bump docker tag for release. (#1055)
    • 7da02bf Bump scorecard to v4.10.2 to remove a CODEOWNERS printf statement. (#1054)
    • 013c0f8 :seedling: Bump actions/dependency-review-action from 3.0.1 to 3.0.2
    • f93c094 :seedling: Bump github/codeql-action from 2.1.36 to 2.1.37
    • ce8978e :seedling: Bump actions/upload-artifact from 3.1.0 to 3.1.1
    • 5ce49db :seedling: Bump actions/setup-go from 3.4.0 to 3.5.0
    • 15c10fc Update tag to v2.1.1 (#1047)
    • f96da1a :seedling: Update scorecard for the panic (#1045)
    • 813a825 Complete the list of required actions (#1044)
    • be62ea8 Update RELEASE.md (#1042)
    • Additional commits viewable in compare view

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

    Dependabot will merge this PR once CI passes on it, as requested by @bebleo.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 2
  • Bump github/codeql-action from 1.1.6 to 2.1.22

    Bump github/codeql-action from 1.1.6 to 2.1.22

    ⚠️ Dependabot is rebasing this PR ⚠️

    Rebasing might not happen immediately, so don't worry if this takes some time.

    Note: if you make any changes to this PR yourself, they will take precedence over the rebase.


    Bumps github/codeql-action from 1.1.6 to 2.1.22.

    Changelog

    Sourced from github/codeql-action's changelog.

    CodeQL Action Changelog

    [UNRELEASED]

    No user facing changes.

    2.1.22 - 01 Sep 2022

    • Downloading CodeQL packs has been moved to the init step. Previously, CodeQL packs were downloaded during the analyze step. #1218
    • Update default CodeQL bundle version to 2.10.4. #1224
    • The newly released Poetry 1.2 is not yet supported. In the most common case where the CodeQL Action is automatically installing Python dependencies, it will continue to install and use Poetry 1.1 on its own. However, in certain cases such as with self-hosted runners, you may need to ensure Poetry 1.1 is installed yourself.

    2.1.21 - 25 Aug 2022

    • Improve error messages when the code scanning configuration file includes an invalid queries block or an invalid query-filters block. #1208
    • Fix a bug where Go build tracing could fail on Windows. #1209

    2.1.20 - 22 Aug 2022

    No user facing changes.

    2.1.19 - 17 Aug 2022

    • Add the ability to filter queries from a code scanning run by using the query-filters option in the code scanning configuration file. #1098
    • In debug mode, debug artifacts are now uploaded even if a step in the Actions workflow fails. #1159
    • Update default CodeQL bundle version to 2.10.3. #1178
    • The combination of python2 and Pipenv is no longer supported. #1181

    2.1.18 - 03 Aug 2022

    • Update default CodeQL bundle version to 2.10.2. #1156

    2.1.17 - 28 Jul 2022

    • Update default CodeQL bundle version to 2.10.1. #1143

    2.1.16 - 13 Jul 2022

    • You can now quickly debug a job that uses the CodeQL Action by re-running the job from the GitHub UI and selecting the "Enable debug logging" option. #1132
    • You can now see diagnostic messages produced by the analysis in the logs of the analyze Action by enabling debug mode. To enable debug mode, pass debug: true to the init Action, or enable step debug logging. This feature is available for CodeQL CLI version 2.10.0 and later. #1133

    2.1.15 - 28 Jun 2022

    • CodeQL query packs listed in the packs configuration field will be skipped if their target language is not being analyzed in the current Actions job. Previously, this would throw an error. #1116
    • The combination of python2 and poetry is no longer supported. See actions/setup-python#374 for more details. #1124
    • Update default CodeQL bundle version to 2.10.0. #1123

    2.1.14 - 22 Jun 2022

    No user facing changes.

    ... (truncated)

    Commits
    • b398f52 Merge pull request #1225 from github/update-v2.1.22-a5966ad4
    • b0f41e0 Update changelog for v2.1.22
    • a5966ad Merge pull request #1224 from github/edoardo/2.10.4-bump
    • 8c692b3 Pin poetry to 1.1
    • 693b97b Bump CodeQL version to 2.10.4
    • d92a91c Merge pull request #1218 from github/aeisenberg/move-pack-download-to-init
    • 7294b40 Fix call to endGroup
    • 354bc9f Add Changelog entry
    • 0a2b0d2 Moves calls to pack download to the init action
    • a59fbe2 Merge pull request #1215 from github/dependabot/npm_and_yarn/octokit/types-7.1.1
    • Additional commits viewable in compare view

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 2
  • Bump actions/setup-python from 2.3.2 to 3

    Bump actions/setup-python from 2.3.2 to 3

    Bumps actions/setup-python from 2.3.2 to 3.

    Release notes

    Sourced from actions/setup-python's releases.

    v3.0.0

    What's Changed

    Breaking Changes

    With the update to Node 16, all scripts will now be run with Node 16 rather than Node 12.

    This new major release removes support of legacy pypy2 and pypy3 keywords. Please use more specific and flexible syntax to specify a PyPy version:

    jobs:
      build:
        runs-on: ubuntu-latest
        strategy:
          matrix:
            python-version:
            - 'pypy-2.7' # the latest available version of PyPy that supports Python 2.7
            - 'pypy-3.8' # the latest available version of PyPy that supports Python 3.8
            - 'pypy-3.8-v7.3.8' # Python 3.8 and PyPy 7.3.8
        steps:
        - uses: actions/checkout@v2
        - uses: actions/setup-python@v3
          with:
            python-version: ${{ matrix.python-version }}
    

    See more usage examples in the documentation

    Commits

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 2
  • Bump ossf/scorecard-action from 1.0.3 to 1.0.4

    Bump ossf/scorecard-action from 1.0.3 to 1.0.4

    Bumps ossf/scorecard-action from 1.0.3 to 1.0.4.

    Release notes

    Sourced from ossf/scorecard-action's releases.

    v1.0.4

    Summary

    This release fixes null repository and branch issues: see ossf/scorecard-action#106, ossf/scorecard-action#84 and ossf/scorecard-action#73

    What's Changed

    New Contributors

    Full Changelog: https://github.com/ossf/scorecard-action/compare/v1.0.3...v1.0.4

    Commits
    • c1aec4a :seedling: Verify clean env in build
    • 750f598 :seedling: Dependabot for go
    • 322c6e0 :seedling: Final bits of porting the shell to go
    • 5b4ee38 Bump actions/setup-go from 2.1.5 to 2.2.0
    • 0550e75 Bump github/codeql-action from 1.0.32 to 1.1.0
    • 9e79f66 :seedling: Porting of shell script to go
    • 60701bb ./entrypoints.sh: updated SCORECARD_IS_FORK (#98)
    • 869bc60 :seedling: More unit tests for porting to Go
    • 57f3e8a :seedling: Porting shell script to Go
    • 682b53e :seedling: Porting shell script to Go
    • Additional commits viewable in compare view

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies github_actions 
    opened by dependabot[bot] 2
  • Bump cryptography from 38.0.4 to 39.0.0 in /requirements/latest

    Bump cryptography from 38.0.4 to 39.0.0 in /requirements/latest

    Bumps cryptography from 38.0.4 to 39.0.0.

    Changelog

    Sourced from cryptography's changelog.

    39.0.0 - 2023-01-01

    
    * **BACKWARDS INCOMPATIBLE:** Support for OpenSSL 1.1.0 has been removed.
      Users on older version of OpenSSL will need to upgrade.
    * **BACKWARDS INCOMPATIBLE:** Dropped support for LibreSSL < 3.5. The new
      minimum LibreSSL version is 3.5.0. Going forward our policy is to support
      versions of LibreSSL that are available in versions of OpenBSD that are
      still receiving security support.
    * **BACKWARDS INCOMPATIBLE:** Removed the ``encode_point`` and
      ``from_encoded_point`` methods on
      :class:`~cryptography.hazmat.primitives.asymmetric.ec.EllipticCurvePublicNumbers`,
      which had been deprecated for several years.
      :meth:`~cryptography.hazmat.primitives.asymmetric.ec.EllipticCurvePublicKey.public_bytes`
      and
      :meth:`~cryptography.hazmat.primitives.asymmetric.ec.EllipticCurvePublicKey.from_encoded_point`
      should be used instead.
    * **BACKWARDS INCOMPATIBLE:** Support for using MD5 or SHA1 in
      :class:`~cryptography.x509.CertificateBuilder`, other X.509 builders, and
      PKCS7 has been removed.
    * **BACKWARDS INCOMPATIBLE:** Dropped support for macOS 10.10 and 10.11, macOS
      users must upgrade to 10.12 or newer.
    * **ANNOUNCEMENT:** The next version of ``cryptography`` (40.0) will change
      the way we link OpenSSL. This will only impact users who build
      ``cryptography`` from source (i.e., not from a ``wheel``), and specify their
      own version of OpenSSL. For those users, the ``CFLAGS``, ``LDFLAGS``,
      ``INCLUDE``, ``LIB``, and ``CRYPTOGRAPHY_SUPPRESS_LINK_FLAGS`` environment
      variables will no longer be respected. Instead, users will need to
      configure their builds `as documented here`_.
    * Added support for
      :ref:`disabling the legacy provider in OpenSSL 3.0.x<legacy-provider>`.
    * Added support for disabling RSA key validation checks when loading RSA
      keys via
      :func:`~cryptography.hazmat.primitives.serialization.load_pem_private_key`,
      :func:`~cryptography.hazmat.primitives.serialization.load_der_private_key`,
      and
      :meth:`~cryptography.hazmat.primitives.asymmetric.rsa.RSAPrivateNumbers.private_key`.
      This speeds up key loading but is :term:`unsafe` if you are loading potentially
      attacker supplied keys.
    * Significantly improved performance for
      :class:`~cryptography.hazmat.primitives.ciphers.aead.ChaCha20Poly1305`
      when repeatedly calling ``encrypt`` or ``decrypt`` with the same key.
    * Added support for creating OCSP requests with precomputed hashes using
      :meth:`~cryptography.x509.ocsp.OCSPRequestBuilder.add_certificate_by_hash`.
    * Added support for loading multiple PEM-encoded X.509 certificates from
      a single input via :func:`~cryptography.x509.load_pem_x509_certificates`.
    

    .. _v38-0-4:

    Commits

    Dependabot compatibility score

    Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


    Dependabot commands and options

    You can trigger Dependabot actions by commenting on this PR:

    • @dependabot rebase will rebase this PR
    • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
    • @dependabot merge will merge this PR after your CI passes on it
    • @dependabot squash and merge will squash and merge this PR after your CI passes on it
    • @dependabot cancel merge will cancel a previously requested merge and block automerging
    • @dependabot reopen will reopen this PR if it is closed
    • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
    • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
    • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
    dependencies python 
    opened by dependabot[bot] 0
  • Mail attachments

    Mail attachments

    I just stumbled upon a test case on which I would need to check if a mail contains a given attachment or not, but I could not find documentation about this, and dir did not helped much neither.

    I suggest to implement and document how to check the attachments on mails.

    enhancement 
    opened by azmeuk 0
  • Performance issue when hostname does not resolve to IP

    Performance issue when hostname does not resolve to IP

    Dear James,

    thank you very much for the prompt improvement and the subsequent release. We can confirm the library is working without errors now, even on a misconfigured system.

    However, we observed that a test case usually taking 0.43s on a properly configured system now only completes in 20.50s. While it is running, several stalls occur, indicating that the lack of the resolvable host name has some further drawbacks down the line while running the SMTP conversation.

    So, with this insight, correct local hostname -> IP address resolution should be mandatory before doing any SMTP communication at all, either with a real server, or with this library. It may make sense to mention that detail within the README or another FAQ/troubleshooting section of the documentation, and maybe even drop a word in the corresponding error log message about it.

    In any case, we wanted to share our observations with you and the community.

    Thank you again and with kind regards, Andreas.

    Originally posted by @amotl in https://github.com/bebleo/smtpdfix/issues/195#issuecomment-1237373576

    bug 
    opened by bebleo 1
  • Socket does not consistently close on ready timeout

    Socket does not consistently close on ready timeout

    If the start of the server is aborted because the ready_timeout is exceeded the socket is not consistently closed down. when this happens subsequent uses fail with a message that the host and port are in use.

    bug 
    opened by bebleo 0
  • SMTP AUTH extension not supported by server.

    SMTP AUTH extension not supported by server.

    On Python 3.9.2 on macOS 11.2.1, using pytest 6.2.2 and smtpdfix 0.2.9, the following test fails with smtplib.SMTPNotSupportedError: SMTP AUTH extension not supported by server.. Uncommenting the line that sets SMTPD_ENFORCE_AUTH does not make a difference. The test succeeds if the client.login() line is removed.

    import smtplib
    
    def test_smtpdfix(monkeypatch, smtpd):
        #monkeypatch.setenv("SMTPD_ENFORCE_AUTH", "True")
        client = smtplib.SMTP()
        client.connect(smtpd.hostname, smtpd.port)
        client.login("user", "password")
        client.quit()
    
    documentation 
    opened by jwodder 1
  • PLAIN and LOGIN mechanisms refuse SSL encrypted requests

    PLAIN and LOGIN mechanisms refuse SSL encrypted requests

    When authenticating using the PLAIN and LOGIN authentication mechanisms over SSL/TLS authentication fails. It will succeed when running the server is using STARTTLS. The following test will fail:

    def test_AUTH_LOGIN_success(mock_smtpd_use_starttls, smtpd, user):
        with SMTP(smtpd.hostname, smtpd.port) as client:
            client.starttls()
            code, resp = client.docmd('AUTH', f'LOGIN {encode(user.username)}')
            assert code == 334
            assert resp == bytes(encode('Password'), 'ascii')
            code, resp = client.docmd(f'{encode(user.password)}')
            assert code == 235
    

    The following, however, fails:

    def test_AUTH_LOGIN_failure(mock_smtpd_use_ssl, smtpd, user):
        with SMTP_SSL(smtpd.hostname, smtpd.port) as client:
            code, resp = client.docmd('AUTH', f'LOGIN {encode(user.username)}')
            assert code == 334
            assert resp == bytes(encode('Password'), 'ascii')
            code, resp = client.docmd(f'{encode(user.password)}')
            assert code == 235  # Fails here because the code is "538 Authentication required."
    
    opened by bebleo 0
Releases(v0.4.1)
Owner
James Warne
James Warne
Mailrise is an SMTP server that converts the emails it receives into Apprise notifications

Mailrise is an SMTP server that converts the emails it receives into Apprise notifications. The intended use case is as an email relay for a home lab or network. By accepting ordinary email, Mailrise enables Linux servers, Internet of Things devices, surveillance systems, and outdated software to gain access to the full suite of 60+ notification services supported by Apprise, from Matrix to Nextcloud to your desktop or mobile device.

Ryan Young 293 Jan 7, 2023
Tempmail API aswell as a SMTP server.

Tempmail API/Server Tempmail API aswell as a SMTP server. Website · Report Bug · Request Feature Setup Firstly create a mongodb account, and proceed t

femboy.party 16 Mar 9, 2022
SMTP In some vulnerable configurations, email servers can also be aggregated Use information that gives us information about the host or network Give

SMTP In some vulnerable configurations, email servers can also be aggregated Use information that gives us information about the host or network Give. The SMTP protocol supports some basic commands such as VRFY and EXPN Slowly A VRFY request asks the server to verify an email address while Which requests an EXPN request for email list membership. These requests are The power is sometimes misused to verify the existence of a user on the email server Used by hackers later

m3hr44n 1 Jan 16, 2022
Python script for imap, pop3, smtp and IPv4 analyze

Python script for imap, pop3, smtp and IPv4 analyze

Vladislav Kotletkin 1 Jan 30, 2022
:incoming_envelope: IMAP/SMTP sync system with modern APIs

Nylas Sync Engine The Nylas Sync Engine provides a RESTful API on top of a powerful email sync platform, making it easy to build apps on top of email.

Nylas 3.5k Dec 23, 2022
Esio_dev 3 Oct 15, 2021
xxnx its a simple smtp tool for mails spaming

xxnx its a simple smtp tool for mails spaming what is smpt? Simple Mail Transfer Protocol or smtp service. The Simple Mail Transfer Protocol (SMTP) is

0xD4$H 3 Feb 27, 2022
Command line interface for sending email using SMTP (ships with Gmail configuration).

mailsend Description Lightweight command line interface for sending email using SMTP. Default configuration is set for Gmail (smtp.gmail.com at port 5

Keith Mathe 1 Mar 22, 2022
Django SMTP Protocol with Gmail

Django SMTP Protocol with Gmail This is the free service from gmail to send and receive emails. What we need for this things done, Python/pip install

Mehedi Hasan 3 Dec 13, 2022
Secret Service Email Encryption/Steganography

SecretService Decoy Encrypted Emailer

Unit 221B 6 Aug 5, 2022
GMailBomber is a form of Internet abuse which is perpetrated through the sending of massive volumes of email to a specific email address with the goal of overflowing the mailbox and overwhelming the mail server hosting the address, making it into some form of denial of service attack.

GMailBomber is a form of Internet abuse which is perpetrated through the sending of massive volumes of email to a specific email address with the goal of overflowing the mailbox and overwhelming the mail server hosting the address, making it into some form of denial of service attack.

Muneeb 5 Nov 13, 2022
A Python Mail Server

Salmon - A Python Mail Server Download: https://pypi.org/project/salmon-mail/ Source: https://github.com/moggers87/salmon Docs: https://salmon-mail.re

Matt Molyneaux 582 Dec 30, 2022
This is the mail server that handles responses from the Contact Form

mailserver About This is the mail server that handles responses from the Contact Form Contributors ✨ Thanks goes to these wonderful people (emoji key)

IoLang 3 Jan 3, 2022
A python mailserver meant for friends who value privacy and a hard to use interface....

python-mail A python mailserver meant for friends who value privacy and a hard to use interface.... Basic info This mailserver was just a random proje

Hashm 2 Jan 19, 2022
Use Django admin to manage drip campaign emails using querysets on Django's User model.

Django Drip Drip campaigns are pre-written sets of emails sent to customers or prospects over time. Django Drips lets you use the admin to manage drip

Zapier 630 Nov 16, 2022
Email-bomber - Email bomber unlike other email bombers u don't need your gmail email id to use this

Email-bomber - Email bomber unlike other email bombers u don't need your gmail email id to use this

rfeferfefe 82 Dec 17, 2022
Mailer is python3 script use for sending spear-phishing to target email...It was created by Spider Anongreyhat

Mailer Mailer is a python3 script. It's used for sending spear-phishing to target email...It was created by Spider Anongreyhat Screenshots Installatio

Spider Anongreyhat 31 Dec 5, 2022
Django email backends and webhooks for Amazon SES, Mailgun, Mailjet, Postmark, SendGrid, Sendinblue, SparkPost and more

Django email backends and webhooks for Amazon SES, Mailgun, Mailjet, Postmark, SendGrid, Sendinblue, SparkPost and more

null 1.4k Jan 1, 2023
You take an email and password from the combo list file and check it on mail.com

Brute-Force-mail tool information: Combo Type: email:pass Domains: All domains of the site Url: https://www.mail.com Api: ☑️ Proxy: No ☑️ The correct

null 6 Jun 5, 2022