RGB Text Fan Controller
This repository contains scripts to control a RGB text fan attached to a Raspberry Pi.
Setup
The Raspberry Pi and RGB text fan need to be wired as followed:
IMAGE
The following dependencies need to be installed:
sudo apt-get install libusb-1.0-0.dev
sudo pip3 install git+https://github.com/LukePrior/microwave_usb_fan
sudo pip3 install Flask
The script can be run with:
sudo python3 main.py
The website can then be accessed from the Pi's local IP on port 80.
You can find the complete installation and setup guide in the Diyode Magazine article.
DIYODE Magazine Article
License
This project is licensed under the MIT License. This project contains code from the Micro Wave USB Fan repository.