A Graph Learning library for Humans
These novel algorithms include but are not limited to:
- A graph construction and graph searching class can be found here (NodeGraph). It was developed and invented as a faster alternative for hierarchical DAG construction and searching.
- A fast DBSCAN method utilizing my connectivity code as invented during my PhD.
- A NLP pattern matching algorithm useful for sequence alignment clustering.
- High dimensional alignment code for aligning models to data.
- An SVD based variant of the Distance Geometry algorithm. For going from relative to absolute coordinates.
Visit the active code via : https://github.com/richardtjornhammar/graphtastic
Pip installation with :
pip install graphtastic
Version controlled installation of the Graphtastic library
The Graphtastic library
In order to run these code snippets we recommend that you download the nix package manager. Nix package manager links from Februari 2022:
https://nixos.org/download.html
$ curl -L https://nixos.org/nix/install | sh
If you cannot install it using your Wintendo then please consider installing Windows Subsystem for Linux first:
https://docs.microsoft.com/en-us/windows/wsl/install-win10
In order to run the code in this notebook you must enter a sensible working environment. Don't worry! We have created one for you. It's version controlled against python3.9 (and experimental python3.10 support) and you can get the file here:
https://github.com/richardtjornhammar/graphtastic/blob/master/env/env39.nix
Since you have installed Nix as well as WSL, or use a Linux (NixOS) or bsd like system, you should be able to execute the following command in a termnial:
$ nix-shell env39.nix
Now you should be able to start your jupyter notebook locally:
$ jupyter-notebook graphhaxxor.ipynb
and that's it.
EXAMPLE 0
Running
import graphtastic.graphs as gg
import graphtastic.clustering as gl
import graphtastic.fit as gf
import graphtastic.convert as gc
Should work if the install was succesful
Example 1 : Absolute and relative coordinates
In this example, we will use the SVD based distance geometry method to go between absolute coordinates, relative coordinate distances and back to ordered absolute coordinates. Absolute coordinates are float values describing the position of something in space. If you have several of these then the same information can be conveyed via the pairwise distance graph. Going from absolute coordinates to pairwise distances is simple and only requires you to calculate all the pairwise distances between your absolute coordinates. Going back to mutually orthogonal ordered coordinates from the pariwise distances is trickier, but a solved problem. The distance geometry can be obtained with SVD and it is implemented in the graphtastic.fit module under the name distance_matrix_to_absolute_coordinates. We start by defining coordinates afterwhich we can calculate the pair distance matrix and transforming it back by using the code below
import numpy as np
coordinates = np.array([[-23.7100 , 24.1000 , 85.4400],
[-22.5600 , 23.7600 , 85.6500],
[-21.5500 , 24.6200 , 85.3800],
[-22.2600 , 22.4200 , 86.1900],
[-23.2900 , 21.5300 , 86.4800],
[-20.9300 , 22.0300 , 86.4300],
[-20.7100 , 20.7600 , 86.9400],
[-21.7900 , 19.9300 , 87.1900],
[-23.0300 , 20.3300 , 86.9600],
[-24.1300 , 19.4200 , 87.2500],
[-23.7400 , 18.0500 , 87.0000],
[-24.4900 , 19.4600 , 88.7500],
[-23.3700 , 19.8900 , 89.5200],
[-24.8500 , 18.0000 , 89.0900],
[-23.9600 , 17.4800 , 90.0800],
[-24.6600 , 17.2400 , 87.7500],
[-24.0800 , 15.8500 , 88.0100],
[-23.9600 , 15.1600 , 86.7600],
[-23.3400 , 13.7100 , 87.1000],
[-21.9600 , 13.8700 , 87.6300],
[-24.1800 , 13.0300 , 88.1100],
[-23.2900 , 12.8200 , 85.7600],
[-23.1900 , 11.2800 , 86.2200],
[-21.8100 , 11.0000 , 86.7000],
[-24.1500 , 11.0300 , 87.3200],
[-23.5300 , 10.3200 , 84.9800],
[-23.5400 , 8.9800 , 85.4800],
[-23.8600 , 8.0100 , 84.3400],
[-23.9800 , 6.5760 , 84.8900],
[-23.2800 , 6.4460 , 86.1300],
[-23.3000 , 5.7330 , 83.7800],
[-22.7300 , 4.5360 , 84.3100],
[-22.2000 , 6.7130 , 83.3000],
[-22.7900 , 8.0170 , 83.3800],
[-21.8100 , 6.4120 , 81.9200],
[-20.8500 , 5.5220 , 81.5200],
[-20.8300 , 5.5670 , 80.1200],
[-21.7700 , 6.4720 , 79.7400],
[-22.3400 , 6.9680 , 80.8000],
[-20.0100 , 4.6970 , 82.1500],
[-19.1800 , 3.9390 , 81.4700] ]);
if __name__=='__main__':
import graphtastic.fit as gf
distance_matrix = gf.absolute_coordinates_to_distance_matrix( coordinates )
ordered_coordinates = gf.distance_matrix_to_absolute_coordinates( distance_matrix , n_dimensions=3 )
print ( ordered_coordinates )
You will notice that the largest variation is now aligned with the X axis, the second most variation aligned with the Y axis and the third most, aligned with the Z axis while the graph topology remained unchanged.
Example 2 : Deterministic DBSCAN
DBSCAN is a clustering algorithm that can be seen as a way of rejecting points, from any cluster, that are positioned in low dense regions of a point cloud. This introduces holes and may result in a larger segment, that would otherwise be connected via a non dense link to become disconnected and form two segments, or clusters. The rejection criterion is simple. The central concern is to evaluate a distance matrix with an applied cutoff
this turns the distances into true or false values depending on if a pair distance between point i and j is within the distance cutoff. This new binary Neighbour matrix
tells you wether or not two points are neighbours (including itself). The DBSCAN criterion states that a point is not part of any cluster if it has fewer than
minPts neighbors. Once you've calculated the distance matrix you can immediately evaluate the number of neighbors each point has and the rejection criterion, via . If the rejection vector R value of a point is True then all the pairwise distances in the distance matrix of that point is set to a value larger than epsilon. This ensures that a distance matrix search will reject those points as neighbours of any other for the choosen epsilon. By tracing out all points that are neighbors and assessing the connectivity (search for connectivity) you can find all the clusters.
import numpy as np
from graphtastic.clustering import dbscan, reformat_dbscan_results
from graphtastic.fit import absolute_coordinates_to_distance_matrix
N = 100
N05 = int ( np.floor(0.5*N) )
R = 0.25*np.random.randn(N).reshape(N05,2) + 1.5
P = 0.50*np.random.randn(N).reshape(N05,2)
coordinates = np.array([*P,*R])
results = dbscan ( distance_matrix = absolute_coordinates_to_distance_matrix(coordinates,bInvPow=True) , eps=0.45 , minPts=4 )
clusters = reformat_dbscan_results(results)
print ( clusters )
Example 3 : NodeGraph, distance matrix to DAG
Here we demonstrate how to convert the graph coordinates into a hierarchy. The leaf nodes will correspond to the coordinate positions.
import numpy as np
coordinates = np.array([[-23.7100 , 24.1000 , 85.4400],
[-22.5600 , 23.7600 , 85.6500],
[-21.5500 , 24.6200 , 85.3800],
[-22.2600 , 22.4200 , 86.1900],
[-23.2900 , 21.5300 , 86.4800],
[-20.9300 , 22.0300 , 86.4300],
[-20.7100 , 20.7600 , 86.9400],
[-21.7900 , 19.9300 , 87.1900],
[-23.0300 , 20.3300 , 86.9600],
[-24.1300 , 19.4200 , 87.2500],
[-23.7400 , 18.0500 , 87.0000],
[-24.4900 , 19.4600 , 88.7500],
[-23.3700 , 19.8900 , 89.5200],
[-24.8500 , 18.0000 , 89.0900],
[-23.9600 , 17.4800 , 90.0800],
[-24.6600 , 17.2400 , 87.7500],
[-24.0800 , 15.8500 , 88.0100],
[-23.9600 , 15.1600 , 86.7600],
[-23.3400 , 13.7100 , 87.1000],
[-21.9600 , 13.8700 , 87.6300],
[-24.1800 , 13.0300 , 88.1100],
[-23.2900 , 12.8200 , 85.7600],
[-23.1900 , 11.2800 , 86.2200],
[-21.8100 , 11.0000 , 86.7000],
[-24.1500 , 11.0300 , 87.3200],
[-23.5300 , 10.3200 , 84.9800],
[-23.5400 , 8.9800 , 85.4800],
[-23.8600 , 8.0100 , 84.3400],
[-23.9800 , 6.5760 , 84.8900],
[-23.2800 , 6.4460 , 86.1300],
[-23.3000 , 5.7330 , 83.7800],
[-22.7300 , 4.5360 , 84.3100],
[-22.2000 , 6.7130 , 83.3000],
[-22.7900 , 8.0170 , 83.3800],
[-21.8100 , 6.4120 , 81.9200],
[-20.8500 , 5.5220 , 81.5200],
[-20.8300 , 5.5670 , 80.1200],
[-21.7700 , 6.4720 , 79.7400],
[-22.3400 , 6.9680 , 80.8000],
[-20.0100 , 4.6970 , 82.1500],
[-19.1800 , 3.9390 , 81.4700] ]);
if __name__=='__main__':
import graphtastic.graphs as gg
import graphtastic.fit as gf
GN = gg.NodeGraph()
#
# bInvPow refers to the distance type. If True then R distances are returned
# instead of R2 (R**2) distances. That is also computing the square root if True
#
distm = gf.absolute_coordinates_to_distance_matrix( coordinates , bInvPow=True )
#
# Now a Graph DAG is constructed from the pairwise distances
GN.distance_matrix_to_graph_dag( distm )
#
# And write it to a json file so that we may employ JS visualisations
# such as D3 or other nice packages to view our hierarchy
GN.write_json( jsonfile='./graph_hierarchy.json' )
227 Jan 5, 2023
3 Feb 12, 2022
7 Oct 5, 2022
1 Feb 7, 2022
688 Jan 3, 2023
8k Jan 5, 2023
3.4k Dec 29, 2022
1.2k Jan 1, 2023
34 Dec 13, 2022
214 Jan 7, 2023
16 Dec 17, 2022
42 Dec 26, 2022
235 Jan 2, 2023
3 May 14, 2022
111 Jan 3, 2023
2 Dec 13, 2021
1 Nov 20, 2021
1 Sep 28, 2021